 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
STEERING CLUTCH ASSEMBLY MAINTENANCE - CONTINUED
0127 00
REMOVAL - CONTINUED
WARNING
Do not remove all capscrews until steering clutch assembly is fully supported by lifting device. Leave one
capscrew on each side of steering clutch. Failure to follow this warning may result in injury to personnel or
equipment damage.
NOTE
6,7
9
10
It will be necessary to move tractor forward or
rearward approximately 2 ft. (0.6 m) to gain
access to all 24 steering clutch capscrews.
2.
Remove 11 capscrews (3) and washers (4) from hub
side of steering clutch (5) assembly.
8
3.
Remove 11 capscrews (6) and washers (7) on flange
side of steering clutch (5) assembly.
4.
Install two 3/8 in. -16NC x 4 in. long rods (8) through
brake band (9) clamp and secure rods with two 3/8 in.
5
hex nuts (10).
386-365
3,4
0127 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals