REMOVAL - CONTINUED - TM-5-2410-233-230571

TM 5-2410-233-23

TRACK ASSEMBLY REPLACEMENT - CONTINUED

0119 00

REMOVAL - CONTINUED

WARNING

To compensate for weight imbalance when removing one track, a metal block must be placed between

frame and equalizer bar on same side from which track is to be removed. Failure to follow this precaution

can result in injury or death to personnel and damage to equipment.

11.

Install wood block, approximately 2-1/4 in. (5.7 cm)

thick, between frame and equalizer bar.

WOOD

BLOCK

386-253

12.

Remove four capscrews (9) and master link (6) from track.

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.

13.

Use a suitable lifting device to lift track and remove track block (7) from under track. Ensure that track still makes con-

tact with sprocket.

14.

Slowly move machine forward to separate and remove track from roller frame.

0119 00-3