 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRACK ASSEMBLY REPLACEMENT - CONTINUED
0119 00
INSTALLATION
1.
Position machine, with master link (6) one link past bottom center line of sprocket (5).
WARNING
Keep all personnel clear of front and rear of machine. If track separation occurs, track movement is fast
and uncontrolled. At least 20 ft (6 m) of clearance is required in front and rear of machine. Stand at side of
track when installing master link and bolts. Failure to follow this warning may result in injury or death to
personnel.
2.
Slowly move machine rearward until track is pulled at least one link past top center line of sprocket.
NOTE
Use long bar to keep track taut during installation.
3.
Position a long bar (10) across track carrier roller (11) and between track and sprocket (5).
4.
Slowly move machine rearward and slowly feed track over front idler (12) and two carrier rollers (11). Use bar (10) to
guide track and move bar along with track. Stop rotation when first link reaches the 4 o'clock position (8 o'clock posi-
tion on left-hand track) on front idler.
10
5
11
12
386-254
386-255
5.
Install chain (13) and links (14) between track links in
14
5
13
14
ends of track. Leave about 4 in. (10.2 cm) clearance
between chain and track pins.
6.
Move machine rearward until bottom link is below a
horizontal line through center of sprocket (5).
386-256
0119 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals