 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
STEERING CLUTCH AND FINAL DRIVE CASE TOP COVERS REPLACEMENT - CONTINUED
0105 00
INSTALLATION
1.
Wipe mating surfaces clean with a rag. Ensure all gasket material is removed and mounting surfaces are clean and dry.
2.
If removed, install four pins (9) to left side of steering clutch and final drive case.
WARNING
Exposure to silicone RTV compound may be hazardous to your health. Contact with eyes can cause severe
irritation and burns. Compound can be absorbed into the skin and can cause irritation or skin sensitiza-
tion. Inhalation of vapors can cause respiratory tract irritation; prolonged inhalation can result in an aller-
gic reaction. Vapors are combustible. Do not use near open flame. Wear eye and skin protection and avoid
inhalation of vapors. Use only in a well-ventilated area. Failure to follow this warning can cause injury or
death.
3.
Apply silicone RTV compound to both sides of new gasket (8). Position gasket on steering clutch and final drive case,
with bolt holes aligned.
WARNING
Use caution when handling heavy parts. Provide adquate support and use assistance during procedure.
Failure to follow this warning may cause injury.
NOTE
Cover weighs 65 lb (30 kg).
4.
If removed, install two lifting links with 3/8 -16 x 1-1/2 in. bolts in cover (1), positioned to ensure a balanced lift.
5.
If removed, attach a nylon sling to lifting links and attach sling to a suitable lifting device.
6.
Lift cover (1) into position on gasket (8) and align mounting bolt holes.
7.
Remove lifting device, bolts and lifting links from cover (1).
8.
If installing cover (1) on right side, install 15 new lockwashers (3), bolts (2), two spacers (4) and bolt (5).
9.
If installing cover (1) on left side, install 16 new lockwashers (7) and bolts (6).
10.
Tighten bolts (2 and 6) to 100 lb-ft (136 Nm).
11.
Install breather in cover (WP 0099 00).
12.
Connect steering brake linkage to brake actuating mechanism (WP 0121 00).
13.
Install fuel tank (WP 0049 00).
14.
Install seat and seat base assembly (WP 0137 00).
END OF WORK PACKAGE
0105 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals