 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
STEERING CLUTCH AND FINAL DRIVE CASE TOP COVERS REPLACEMENT - CONTINUED
0105 00
REMOVAL
WARNING
Use caution when handling heavy parts. Provide adquate support and use assistance during procedure.
Failure to follow this warning may cause injury.
NOTE
Removal of right and left covers is the same except for minor differences in mounting hardware.
1.
If removing cover (1) on right side, remove 15 bolts (2), lockwashers (3), two spacers (4) and bolt (5). Discard lock-
washers.
2.
If removing cover (1) on left side, remove 16 bolts (6) and lockwashers (7). Discard lockwashers.
NOTE
Cover weighs 65 lb (30 kg).
3.
Install two lifting links with 3/8 -16 x 1-1/2 in. bolts in cover (1), positioned to ensure a balanced lift.
4.
Attach a nylon sling to lifting links and attach sling to a suitable lifting device. Take up slack in sling.
5.
Install two forcing screws in cover (1) and separate cover from steering clutch and final drive case.
6.
Lift cover (1) from steering clutch and final drive case and remove.
7.
Remove forcing screws from cover (1).
8.
If cover (1) is being replaced, remove lifting device, sling, bolts, and lifting links from cover.
9.
Remove gasket (8) and discard.
10.
If damaged, remove four pins (9) from steering clutch and final drive case where left cover (1) was installed.
2
6
41
2
5
7
3
9
1
8
8
RIGHT
LEFT
386-820
0105 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals