 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
DRIVE SPROCKET SHAFT REPLACEMENT - CONTINUED
0103 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death to
personnel.
NOTE
Sprocket shaft weighs approximately 200 lb (91 kg).
11.
Attach a nylon sling and a suitable lifting device to
8
sprocket shaft (5) close to bevel gear case (8) and raise
5
lifting device to take weight off shaft.
12.
Remove nut (3) from opposite end of sprocket shaft
(5).
CAUTION
Use caution and remove sprocket shaft slowly
to avoid damage to threads on shaft and in gear
case.
13.
Remove sprocket shaft (5) from bevel gear case (8).
386-291
3 (HIDDEN)
0103 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals