 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
DRIVE SPROCKET SHAFT REPLACEMENT - CONTINUED
0103 00
REMOVAL - CONTINUED
3.
Install threaded adapter (4) on sprocket shaft (5) and
turn until all threads are engaged.
5
4
4.
Install and turn stud extension (6) completely into
6
adapter (4).
386-289
NOTE
When installing protective sleeve, ensure slot opening is away from bevel gear case.
5.
Install protective sleeve (7) over stud extension (6) until sleeve contacts bevel gear case (8).
6.
Install head (9) into protective sleeve (7).
7.
Install cylinder (10) on stud extension (6) and against head (9) and secure with nut (11).
8.
Connect hydraulic pump to cylinder (10) and hold
8
protective sleeve (7) and head (9) in alignment.
9
10
7
9.
Apply pressure to sprocket shaft (5) to loosen from
taper.
11
6
WARNING
Ensure piston of cylinder is retracted and pres-
sure is off prior to removal of tools. Failure to
follow this warning could result in personal
injury.
5
10.
Remove tooling from sprocket shaft (5).
(HIDDEN)
386-290
0103 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals