 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
0100 00
REMOVAL
NOTE
This procedure applies to either R.H. or L.H. final drive assembly.
1.
Remove two capscrews (1) and lockwashers (2) from final drive case (3). Discard lockwashers.
WARNING
Guide pins must be installed as instructed to avoid injury to personnel.
2.
Install two 5/8 in. -11NC guide pins (4) and three 1/2 in. -13NC forcing screws (5) in final drive case (3).
3.
Remove 29 remaining capscrews (1) and lockwashers (2) from final drive case (3). Discard lockwashers.
4.
Tighten forcing screws (5) evenly until final drive case (3) is approximately 0.25 in. (6.3 mm) away from steering clutch
case (6).
4
5
1,2
5
5
6
4
3
386-135
0100 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals