FINAL DRIVE CASE, GEARS, IDLER PINION, AND BEARINGS REPLACEMENT

TM 5-2410-233-23

FINAL DRIVE CASE, GEARS, IDLER PINION, AND BEARINGS REPLACEMENT

THIS WORK PACKAGE COVERS

Removal, Cleaning, Inspection, Installation

INITIAL SETUP

Materials/Parts - Continued

Tools and Special Tools

Tool kit, general mechanic's (Item 112, WP 0185

Lock (18 and 25)

Lockwasher (2)

Shop equipment, general purpose repair (Item 97,

Pin, guide, 5/8 in. - 11NC

Link, lifting (Item 44, WP 0185 00)

Plug (9)

Link, lifting (Item 124, WP 0185 00)

Retainer (23)

Pin, shoulder (Item 57, WP 0185 00)

Press, arbor (Item 65, WP 0185 00)

Screw, #10-32

Sling, nylon (Item 100, WP 0185 00)

Wood blocks, 4 in. x 4 in. x 3 ft long

Lifting equipment, 400 lb capacity

Bolt, 5/8 -11 x 2 in.

References

Bolt, 3/8 -16 x 1-1/2 in.

TM 5-2410-233-10

Materials/Parts

WP 0086 00

Compound, gasket shellac (Item 8, WP 0184 00)

Grease, GAA (Item 15, WP 0184 00)

Oil, lubricating (Item 22, 23, 24 or 25, WP 0184 00)

Personnel Required

Rag, wiping (Item 28, WP 0184 00)

Two

Wire, nonelectrical (Item 37, WP 0184 00)

Equipment Condition

Capscrew, forcing, 1/2 in. -13NC (5)

Capscrew, 1/4 in. -20NC

Track drive sprocket removed (WP 0118 00)

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.