 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
GOVERNOR AND FUEL INJECTION PUMP HOUSING REPLACEMENT - CONTINUED
0051 00
REMOVAL - CONTINUED
6.
Wrap a nylon sling around governor and fuel injection
13
pump housing (9). Attach sling to suitable lifting
12
device.
7.
Remove two bolts (10) from oil manifold and gover-
nor and fuel injection pump housing (9).
9
8.
Remove three nuts (11) and separate governor and fuel
injection pump housing (9) from engine.
9.
Remove two O-rings (12 and 13) from governor and
fuel injection pump housing (9). Discard O-rings.
11
10
386-272
INSTALLATION
1.
Adjust timing on bench by timing pin method:
a.
Remove four bolts (14) and timing cover (15) from governor and fuel injection pump housing (9). Remove gasket
(16) and discard.
b.
Install timing pin and turn camshaft until timing pins goes in groove in fuel pump camshaft.
15
14
16 (HIDDEN)
TIMING PIN
386-784
386-780
9
0051 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals