|
|
TM 5-2410-233-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 6. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
d. Place battery disconnect
5.
Starting Motor Inoperative - Continued.
switch in ON position.
e. Momentarily turn start 1. If voltage is indicated, go to
Table 6, Malfunction 5, Test 9.
switch fully to the right and
observe
reading.
2. If voltage is not indicated,
replace starter relay (WP 0177
386-487
9. Test for continuity between
starter relay ground wire and
chassis ground.
a. Place battery disconnect
switch in OFF position.
b. Connect meter positive
lead to ground wire for
relay (harness side) and
negative lead to chassis
ground.
c. Observe
multimeter 1. If continuity is indicated, go to
reading.
Table 5, Malfunction 5, Test
10.
2. If continuity is not indicated,
repair ground (WP 0177 00).
0006 00-31
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |