Starting Motor Inoperative - Continued.

TM 5-2410-233-23

TROUBLESHOOTING PROCEDURES - CONTINUED

0006 00

Table 6. Electrical System Troubleshooting Procedures - Continued.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

e. Momentarily turn start 1. If voltage is indicated, go to

Starting Motor Inoperative - Continued.

Table 6, Malfunction 5, Test 8.

switch fully to the right and

observe

reading.

2. If voltage is not indicated,

place

battery

disconnect

switch in OFF position,

reconnect white wire and go to

Table 6, Malfunction 5, Test

11.

386-486

8. Test for voltage between

starter relay and chassis

ground.

a. Place battery disconnect

switch in OFF position.

b. Disconnect ground from

starter relay.

c. Connect

positive lead to ground

terminal on relay (relay

side) and negative lead to

chassis ground.

0006 00-30