Air Lines and Tank Installation. (cont) -666030014

MWO 9-2320-273-20-1

(9) Route tube through clamp to connector assembly on front of new air tank, cut tube, and

secure tube to connector assembly with sleeve and nut as shown in figure 14.

NOTE

Coat threads on plugs, bushing elbow, and draincock being installed in

steps 10, 11, 12, 13 and 14 with pipe sealing compound prior to installa-

tion.

(10) Install SAE J514 6 080109B plug in upper port on air tank as shown in figure 14.

(11) Install MS35784-2 draincock in lower port on air tank as shown in figure 14.

Figure 14