ENGINE BLOCK REPAIR (CONT) -726030040

TM 9-2320-360-34-2

e. Follow-On Maintenance

(1) Install main bearings and crankshaft (para 19-8).

(2) Install pistons, connecting rods, and liners (para 19-10).

(3) Install front end plate (para 19-5).

(4) Install rear end plate (para 19-6).

(5) Install idler gear (para 19-13).

(6) Install camshafts and end bearings (para 19-12).

(7) Install blower drive support (para 4-8).

(8) Install flywheel housing (para 19-9).

(9) Install flexplate assembly (para 3-17).

(10) Install engine block breather tube (para 3-6).

(11) Install crankshaft cover, front oil seal, and oil pump (para 19-14).

(12) Install oil pressure relief valve (para 3-21).

(13) Install oil pressure regulator valve (para 3-22).

(14) Install oil pan (para 3-20).

(15) Install cylinder heads (para 3-10).

(16) Install SRSITRS sensor (para 3-7).

(17) Install injectors (para 4-2).

(18) Install rocker arms (para 3-18).

(19) Install engine brake retarders (para 3-26).

(20) Install engine brake retarder wire harnesses (para 6-16).

(21) Install aftercooler (para 5-7).

(22) Install blower (para 4-6).

(23) Install tachometer drive gear (para 3-25).

(24) Install blower accessory drive hub (para 4-9).

(25) Install fuel supply pump (para 4-4).

(26) Install air inlet adapter (para 4-5).

(27) Install turbocharger (para 4-11).

(28) Install crankshaft vibration damper (para 3-14).

(29) Install crankshaft pulley (para 3-12).

(30) Install water pump drive gear (para 3-24).

(31) Install vibration damper and front cover (para 3-15).

(32) Install water pump (para 5-5).

(33) Install secondary fuel filter head (para 4-13).

(34) Install right thermostat housing (para 5-4).

(35) Install left thermostat housing (para 5-3).

(36) Install oil cooler and housing (para 3-19).

(37) Adjust valve clearance, engine brake retarder, and fuel injector timing (para 3-27).

19-25