 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
RIPPER ASSEMBLY MAINTENANCE - CONTINUED
0238 00
REMOVAL - CONTINUED
CAUTION
Wipe area clean around all hydraulic connections to be opened during removal. Cap oil lines and plug
openings to lift cylinders after removing lines. Contamination of hydraulic system could result in pre-
mature failure.
Utilize line wrenches for removal to avoid damage to fittings.
NOTE
Tag hydraulic lines and connections to ensure correct installation.
Use a suitable container to catch any oil that may drain from system. Dispose of oil IAW local policy
and ordinances. Ensure all spills are cleaned up.
9.
Remove four capscrews (9), washers (10), two flanges (11) and disconnect each of two hose assemblies (12) from tube
assemblies (13) on lift cylinder (6).
10.
Remove two O-rings (14) from hose assemblies (12). Discard O-rings.
11.
Repeat steps 9 and 10 for lift cylinder (6) on other side of ripper.
12.
Attach a nylon sling and a suitable lifting device to lift cylinder (6) and lift cylinder up and toward mounting bracket
(15). Use chains to secure cylinder to mounting bracket.
13.
Repeat step 12 for lift cylinder (6) on other side of ripper.
12
11
14
9
12
10
6
9
10
14 11
1
6
13
387-763
15
0238 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals