CHU BUSHING REMOVER/INSTALLER (SMALL).

TM 9-2320-364-34-1

C-19. CHU BUSHING REMOVER/INSTALLER (SMALL).

0.25 IN. x 45 DEGREE

CHAMFER (6.35 mm)

2.5

2.76 .005 IN.

1.275 IN.

.005 IN.

(7.01 CM)

(32.38 CM)

(65.0 CM)

1.25 IN.

(31.75 CM)

3.25 IN.

(8.255 CM)

Fabricate small CHU bushing remover/installer from 3.25 in. (8.255 cm) x 2.76 in. (7.01 cm) diameter steel stock.

Turn round stock to 2.76 in. .005 in. (7.01 cm ∝∝≥

Cut a 1/4 in. (6 mm) x 45 degree chamfer where indicated.

Drill through a 1.275 in. (32.38 mm) hole in the center of the 2.76 in. diameter steel stock where indicated.

Starting at the end opposite of the chamfer, turn a length of 2.00 in. down to 2.5 in. .005 in. where indicated.

Paint as required.

C-20