 |
|||
|
|
|||
|
Page Title:
LHS BUSHING REMOVER/INSTALLER (SMALL). |
|
||
| ||||||||||
|
|
 TM 9-2320-364-34-1
C-18. LHS BUSHING REMOVER/INSTALLER (SMALL).
0.25 IN. x 45 DEGREE
CHAMFER (6.35 mm)
3.146
3.339 .005 IN.
1.275 IN.
.005 IN.
(84.83 mm)
(32.38 mm)
(80.0 mm)
1.25 IN.
(31.75 mm)
4.00 IN.
(101.60 mm)
Fabricate large LHS bushing remover/installer from 4 in. (101 mm) x 3.339 in. diameter steel stock.
Turn round stock to 3.339 in. .005 in.
a.
Cut a 1/4 in. (6 mm) x 45 degree chamfer where indicated.
b.
Drill through a 1.275 in. hole in the center of the 3.339 in. diameter steel stock where indicated.
c.
Starting at the end opposite of the chamfer, turn a length of 2.75 in. down to 3.146 in. .005 in. where
d.
indicated.
Paint as required.
e.
C-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals