Click here to make tpub.com your Home Page

Page Title: FAULT CODE 060, 061, 071 OR 072: TEMPERATURE SENSOR OPEN CIRCUIT, TEMPERATURE SENSOR SHORT CIRCUIT, OVERHEAT SENSOR OPEN CIRC...
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-364-34-1
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical circuits, a direct short
may result. Damage to equipment, injury or death to personnel may occur.
NOTE
Refer to arctic heater (Model B) troubleshooting (TM 9-2320-364-20) for fault code retrieval device
S
(FCRD) operation.
If the fault code retrieval device (FCRD) is not installed, the arctic heater indicator light displays the
S
diagnostic flash codes for the arctic heater. These flash codes are 8 seconds long and repeat after 8
seconds.
The fault code retrieval device (FCRD) displays the last 5 faults that occur. The latest fault displayed
S
is either AF or F1. If more than one fault code is displayed, troubleshoot the latest fault code first.
Perform Steps (4) and (5) only if fault code retrieval device (FCRD) is available.
S
VERIFY REPAIR
(1) If removed, install arctic heater control
unit (Para 18-2.2).
(2) Connect arctic heater unit harness
connector to arctic heater control unit
(TM 9-2320-364-20).
(3) Ensure vehicle is returned to normal
operating condition.
(4) Install fault code retrieval device
(FCRD) on arctic heater harness
diagnostic connector.
(5) Press the D button on fault code
retrieval device (FCRD) to turn arctic
heater ON.
(6) Turn arctic heater ON
(TM 9-2320-364-10).
(7) Observe arctic heater indicator light
or fault code retrieval device (FCRD)
display, if installed. Note if arctic
heater indicator light flashes code
shown.
(8) Observe arctic heater for proper
operation.
(9) Turn arctic heater switch OFF
(TM 9-2320-364-10) or press the
D button on the fault code retrieval
device (FCRD), if installed.
(10)If installed, remove fault code retrieval
device (FCRD).
(11) Install cover on arctic heater
(TM 9-2320-364-20).
(a) If arctic heater operates normally
and arctic heater indicator light is
illuminated (Fault code 000
displayed on FCRD), fault has
been corrected.
(b) If arctic heater indicator light
flashed flash code shown (Fault
060, 061, 071 or 072 displayed
on FCRD), notify supervisor.
(c) If arctic heater indicator light
flashed different flash code (Fault
code other than 060, 061, 071 or
072 displayed on FCRD),
troubleshoot arctic heater fault
code displayed
(TM 9-2320-364-20).
2-843 2-77

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business