|
|
TM 9-2320-364-34-1
High pressure hydraulics [oil under 3000 psi
(20,685 kPa) pressure] operate this equipment.
Refer to vehicle operator and maintenance
manuals for hydraulic oil pressure. Never
disconnect any hydraulic line or fitting
without first dropping pressure to zero.
Failure to comply may result in injury to
personnel.
Fuel and oil are slippery and can cause falls.
To avoid injury, wipe up spilled fuel or oil
with rags.
NOTE
Use a drain pan to catch leaking hydraulic oil.
FLOWMETER TEST (CONT).
(20) Connect hose with preformed
packing to elbow.
(21) Connect hose with preformed
packing to fitting.
(22) Connect hose to elbow on four valve
bank.
(23) Install cover with four screws,
washers, lockwashers and nuts.
2-559
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |