|
|
TM 9-2320-364-34-1
11. BOOM DOES NOT TELESCOPE IN OR TELESCOPES IN SLOWLY (CONT).
High pressure hydraulics [oil under 3000 psi
(20,685 kPa) pressure] operate this equipment.
Refer to vehicle operator and maintenance
manuals for hydraulic oil pressure. Never
disconnect any hydraulic line or fitting
without first dropping pressure to zero.
Failure to comply may result in injury to
personnel.
Fuel and oil are slippery and can cause falls.
To avoid injury, wipe up spilled fuel or oil
with rags.
NOTE
Use a drain pan to catch leaking hydraulic oil.
FLOWMETER TEST (CONT).
(14) Set crane POWER switch to
OFF position (TM 9-2320-364-10).
(15) Set hydraulics selector switch to
OFF position.
(16) Turn OFF ENGINE switch.
(17) Disconnect adapter hose from
elbow.
(18) Remove two plugs from hoses.
Discard preformed packings.
(19) Remove two caps from elbow and
adapter. Discard preformed
packings.
Continued on next page.
2-558
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |