LHS HOOK ARM DISENGAGES FROM FLATRACK WHILE UNLOADING. (Cont) -726250497

TM 9-2320-364-34-1

NOTE

Clearance given is for a hook bar with

or without any wear.

CLEARANCE MEASUREMENT TEST

(1) Load flatrack onto truck

(TM 9-2320-364-10).

(2) Verify LHS hook arm is in its lowest

position.

(3) Verify flatrack is resting squarely on all

four LHS support points.

(4) Using a telescoping gage, measure

the vertical clearance between the

bottom of the flatrack hook bar and the

LHS lift hook.

(a) If clearance is less than 0.875 in.

(22.2 mm), fault not corrected,

notify the supervisor.

(b) If clearance is greater than

0.875 in. (22.2 mm), go to Step 3

of this Fault.

2-413