LOSS OF MIDDLE FRAME LOAD HOLDING. (Cont) -726250483

TM 9-2320-364-34-1

All personnel must stand clear during lifting operations. A swinging or shifting load may cause injury or

death to personnel.

VERIFY REPAIR

(1) Position LHS hook to rear of truck

(TM 9-2320-364-10).

(2) Attach 500 lb (227 kg) minimum load

to hook.

(3) Lower middle frame approximately

half of its travel.

(4) Set hydraulic selector switch to OFF

position.

(5) Turn OFF ENGINE switch.

(a) If middle frame does not hold

load, fault not corrected. Perform

Steps (6) through (9) below and

notify supervisor.

(b) If middle frame does hold load,

fault has been corrected.

(6) Remove 500 lb (227 kg) load from

LHS hook.

(7) Put LHS in transit position.

(8) Set hydraulic selector switch to OFF

position.

(9) Turn OFF ENGINE switch.