LOSS OF MIDDLE FRAME SAFE LOWERING. (Cont) -726250351

TM 9-2320-364-34-1

All personnel must stand clear during lifting operations. A swinging or shifting load may cause injury or

death to personnel.

VERIFY REPAIR

(1) Position LHS hook to rear of truck

and engage hook on steel tube

supported by jackstands.

(2) Using LHS, lift truck only enough to

lift vehicle weight off suspension.

Do not lift tires off ground.

(3) Push in middle frame safe lowering

button.

(a) If truck does not settle on its

suspension, fault not corrected.

Perform Steps (4) through (8)

below and notify supervisor.

(b) If truck settles on its suspension,

fault has been corrected.

(4) Disengage hook from steel tube.

(5) Put LHS in transit position.

(6) Set hydraulic selector switch to OFF

position (TM 9-2320-364-10).

(7) Turn OFF ENGINE switch.

(8) Install four screws, lockwashers and

LHS control box cover.