|
|
TM 9-2320-364-34-1
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
DDEC MODE 10 TEST
(1) Connect DDR to DDL connector
MC13.
(2) Start engine (TM 9-2320-364-10).
(3) Select mode 10 to display fuel injector
response times on DDR.
(4) Compare response times of all eight
injectors.
(a) If any injector response time is
less than others or less than .80
milliseconds, perform Steps (5)
and (6) below and replace injector
(Para 4-2).
(b) If injector response times are
same as others or greater
than .80 milliseconds, response
times are OK.
(5) Turn OFF ENGINE switch.
(6) Disconnect DDR from DDL connector
MC13.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |