ENGINE DOES NOT DEVELOP FULL POWER. (Cont) -726250135

TM 9-2320-364-34-1

Allow engine to cool before performing troubleshooting maintenance. If necessary use insulated pads

and gloves. Hot engine components will burn and cause injury to personnel.

VISUAL INSPECTION

(1) Remove 22 screws, lockwashers,

washers, and cab engine access

panel. Discard lockwashers.

(2) Turn ON ENGINE switch,

(TM 9-2320-364-10).

(3) Check secondary fuel filter and/or

cover for leaks or damage.

(a) If secondary fuel filter and/or

cover is leaking or damaged,

perform Steps (4) and (5) below

and replace secondary fuel

filter and/or cover,

(TM 9-2320-364-20).

(b) If secondary fuel filter and/or

cover is not leaking or damaged,

fuel filter and/or cover are OK.

(4) Turn OFF ENGINE switch.

(5) Install cab engine access panel with

22 lockwashers, washers, and screws.