ENGINE DOES NOT DEVELOP FULL POWER. (Cont) -726250131

TM 9-2320-364-34-1

Allow engine to cool before performing troubleshooting maintenance. If necessary use insulated pads

and gloves. Hot engine components will burn and cause injury to personnel.

TURBOCHARGER INSPECTION

(1) Open engine access cover,

(TM 9-2320-364-10).

(2) Loosen clamp and remove air intake

duct from turbocharger.

(3) Loosen clamp and remove exhaust

pipe from turbocharger.

(4) Check mountings, air intake and outlet

ducting gasket, clamps and

connection for damage.

(a) If mountings, intake or exhaust

ducting gasket and connection are

damaged, replace damaged

components, (Para 4-8) and

perform Step (6) below.

(b) If mountings, intake and exhaust

ducting and connection are OK,

go to Step 5 below.

(5) Check impeller and turbine blades for

free movement and damage.

(a) If impeller or turbine blades do

not move freely or if there are

signs of internal oil leaks, replace

turbocharger, (Para 4-8).

(b) If impeller and turbine blades

move freely and there are no

signs of oil leaks, perform Step

(6) below and go to

Step 4 of this Fault.

(6) Install air intake duct and clamp.

(7) Install exhaust pipe and clamp.