Click here to make tpub.com your Home Page

Page Title: PLS FLATRACK (FR).
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-364-34-1
1-22. PLS TRAILER (PLST) (CONT).
b.  Parking Brakes. Spring chamber parking brakes are provided on all PLST axles. The application and release
of the six PLST spring brakes is controlled by a spring brake control valve. An absence of air pressure in the
emergency/spring brake supply line causes the spring brake control valve to activate the spring brakes. The spring
brake control valve also retains air pressure in the PLST air reservoir so the PLST spring brakes can be released by the
spring release valve. The spring brake control valve also prevents compounding of pressures in the brake chambers by
relieving the pressure on the spring brake side of the chambers when the spring brakes are set and the service brakes
are applied. The PLST spring brake release valve is located on the right front corner of the trailer. This valve releases
the PLST spring brakes without a prime mover air supply when there is sufficient air reservoir pressure. After the
spring brakes have been released, they can be reapplied by actuating the release valve. When air is supplied through
the emergency/spring brake supply line, the spring release valve is over-ridden and the trailer spring brakes are
released. If there is insufficient air reservoir pressure to release the trailer parking brakes, a cage nut release is
provided on each spring chamber to mechanically release the spring brakes.
c.  Emergency Brakes. Whenever there is a loss of pressure from the truck or PLST air reservoir, the emergency
brakes are activated.
1-23. PLS FLATRACK (FR).
3
1
8
7
6
5
4
2
Figure 1-29. Palletized Load System Flatrack (FR)
The Flatrack (FR) (1) (Figure 1-29) accommodates a 33,000 lb. (15 metric tons) nominal payload during all modes of
transportation and during all specified load/unload operations. The FR is designed to withstand the dynamic and
static loads imposed while fully loaded during LHS load/unload operations. The FR has an empty weight of
3250 lb. (1476 kg) without sideboards. The FR can accommodate palletized, break bulk and 20 ft. (6.1 m) ISO
container payloads. Tiedowns (2) and sideboards (3) are used to contain and hold cargo. Refer to
TM 9-3990-206-14&P for Unit, Direct Support and General Support Maintenance for the PLS Flatrack.

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business