 |
|||
|
|
|||
|
Page Title:
Sxxx 0 - INJECTOR RESPONSE TIME LONG (cont) |
|
||
| ||||||||||
|
|
 TM 9-2320-364-20-1
Section IV. TROUBLESHOOTING CHARTS (Cont.)
E. FLASH CODE:
61
J1587 CODE:
Sxxx 0 - INJECTOR RESPONSE TIME LONG
STEP/SEQUENCE
RESULT
WHAT TO DO NEXT
61-14
Resistance Test
Set multimeter select switch to
ohms.
Read resistance between wire
Wire 150 at 5-way power
Go to 61-15.
150 at 5-way power harness
harness connector,
connector, terminal D and a known
terminals D and E, and a
good ground.
a known good ground
Read resistance between wire
measure 5 ohms or less.
150 at 5-way power harness
connector, terminal E and a known
More than 5 ohms.
Repair wire 150 or notify
good ground.
supervisor. Go to 61-30.
61-15
Resistance Test
Disconnect both injector harness
connectors at ECM.
Read resistance between wires
Wires 619 and 611 at
Both readings less than or
619 and 611 at injector harness
injector harness
equal to 5 ohms, go to 61-9.
connector, terminals G and L.
connector, terminals G
--
If more than 5 ohms are present,
and L and wires 620 and
repair wire 619 (see schematic
612 at injector harness
Fig 2-4) or notify DS Maintenance
connector, terminals
and perform the steps below.
E and A measure 5 ohms
--
If less than 5 ohms are present,
or less.
wire 619 is OK.
Read resistance between wires
More than 5 ohms.
Repair wires 619 and/or
620 and 612 at injector harness
620 or notify supervisor.
connector, terminals E and A.
Go to 61-30.
Connect 5-way power harness
connector to ECM.
Connect both injector harness
connectors to ECM.
Install rocker arm covers (para
3-4 and/or 3-5).
2-743
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals