|
|
TM 9-2320-364-20-1
Section IV. TROUBLESHOOTING CHARTS (Cont.)
D. CHART - 2 - ENGINE CRANKS BUT WILL NOT START (Cont'd)
-
STEP/SEQUENCE
RESULT
WHAT TO DO NEXT
C 2- 30
-
Verify Repairs
Turn ignition off.
Engine will
All system diagnostics are
Reconnect all connectors.
not start.
complete. Please review this
Turn ignition on.
section from the first step to find
Clear codes.
error.
Note status of "Check Engine"
light.
Engine starts
Repairs are complete.
If "Check Engine" light does not
and DDR reads
stay on, start engine and run
No Codes.
(TM 9-2320-364-10) for 1 minute
or until "Check Engine" light comes
Engine starts
Go to START-1, pg 2-539, to
on. Stop engine.
codes appear.
service codes.
Read inactive codes.
C 2- 31
-
Check Fuel Filters
Turn ignition off.
Clogged filter(s).
Service fuel/water separator
Check primary and secondary fuel
(para 4-15). Replace secondary
filters to be sure they are not
filter (para 4-13). Prime system
clogged and that they are full of
(TM 9-2320-364-10), if
clean fuel.
required. Then go to C 2--30.
Clean filters and
Go to C 2--6.
no air in filters.
2-575
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |