|
|
TM 9-2320-364-20-1
A4 CODE 41 TIMING REFERENCE SENSOR (TRS) (CONT).
4.
KNOWN INFO
TEST OPTIONS
WARNING
Read WARNING
CHECK ENGINE light (CEL)
Resistance test.
on Page 2-317
comes ON and stays ON.
STE/ICE-R #92.
Are there
DDEC ECM connector OK.
more than
DDEC ECM OK.
REASON FOR QUESTION
10,000 ohms measured
between wires 109 and 110 at
Resistance less than or equal to
POSSIBLE PROBLEMS
engine harness connector,
10,000 ohms at engine harness
terminals T1 and T2?
connector indicates signal line
Wires 109 and/or 110 are
wire 110 and return line wire
shorted.
109 are shorted together.
Wires 109 and/or 110 are open.
TRS connector faulty.
TRS faulty.
Repair wires 109
and/or 110 (see
schematic Fig 2-2)
NO
or notify DS
Maintenance.
Verify repair, go to
Step 7 of this Fault.
YES
2-316
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |