|
|
TM 9-2320-364-20-1
A4 CODE 36 OIL PRESSURE SENSOR (OPS) SIGNAL VOLTAGE LOW (CONT).
9.
KNOWN INFO
TEST OPTIONS
WARNING
Read WARNING
CHECK ENGINE light (CEL)
Resistance test.
on Page 2-307
comes ON and stays ON.
STE/ICE-R #92.
Are there
OPS connector OK.
more than
OPS OK.
REASON FOR QUESTION
10,000 ohms or an open
Wire 530 is not open.
circuit measured between
DDEC ECM harness
Less than 10,000 ohms at OPS
wires 452 and 416 at OPS
connector OK.
harness connector indicates
harness connector, terminals
Wires 416 and 452 are
wire 416 (+5 volt line) is shorted
A and C?
not open.
to return line wire 452.
POSSIBLE PROBLEMS
Repair wires 452
Wires 416 and/or 452 are
and/or 416 (see
shorted.
schematic Fig 2-2)
Wires 530, 439, 241 and/or 240
NO
or notify
are shorted.
DS Maintenance.
Wires 530 and/or 452 are
Verify repair, go to
shorted.
Step 12 of this Fault.
YES
2-306
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |