CODE 11 VERNIER CONTROL SIGNAL VOLTAGE LOW (CONT). -726280246

TM 9-2320-364-20-1

A4 CODE 11 VERNIER CONTROL SIGNAL VOLTAGE LOW (CONT).

KNOWN INFO

TEST OPTIONS

WARNING

READ WARNING

Resistance test.

CHECK ENGINE light (CEL)

on Page 2-177

STE/ICE-R #92.

comes ON and stays ON.

Code 11 only code displayed

REASON FOR QUESTION

on DDR.

Are 8,700 to 9,100 ohms

POSSIBLE PROBLEMS

measured between wires 916

Resistance less than 8,700

ohms or greater than 9,100

and 952 at vehicle harness

ohms at vehicle harness

connector MC18, terminals A3

Vehicle harness connector

connector MC18, indicates

and C3?

MC18 faulty.

wires 952, 916 and/or vernier

DDEC ECM faulty.

control are faulty.

Wires 916 and/or 952 shorted.

Wire 916 faulty.

Wires 1525 and/or 952 shorted.

Wires 1525 and/or 916 faulty.

Vernier control terminals

Go to Step 7 of this

damaged.

Fault.

Vernier control faulty.

Wires 240 and/or 241 shorted.

Wire 150 faulty.

Wire 240 faulty.

YES

2-176