Table 2-1. Unit Level Preventive Maintenance Checks and Services (PMCS) (CONT). -726280135

TM 9-2320-364-20-1

Table 2-1. Unit Level Preventive Maintenance Checks and Services (PMCS) (CONT).

Interval

Item to Be

Procedure

Not Mission

Item

Inspected

Capable If:

No.

Do not allow personnel to perform maintenance

directly under the boom or mast. Failure to

follow proper procedures could cause serious

injury or death.

Boom Wear

(4) Refer to TM 9-2320-364-10 and erect

Pads

crane and extend boom.

(continued)

(5) Apply grease to front (lower) wear pads.

(6) Extend and retract boom. If boom

chatters or does not smoothly extend/

retract, refer to TM 9-2320-364-10,

return crane to stowed position and shut

off truck. Repeat Steps (3) through (5).

(7) With boom extended, visually inspect

that the boom sections undersides are

evenly greased along the boom wear pad

riding surfaces. If bare spots are present,

refer to TM 9-2320-364-10, return crane

to stowed position and shut off truck.

Repeat Steps (3) through (6).

(8) Refer to TM 9-2320-364-10 and return

crane to stowed position.

(9) Refer to TM 9-2320-364-10 and shut off

truck.

(10) Install cover plate at rear of boom.

103

Semi-

Cab

Lubricate doors, side panels, engine cover hinges,

Annual

Compartment

locks and pivot points every 1,500 mi (2,414 km)

or semiannually. Lubricate more often if usage is

high. Lubricate door rotary locks and latches

with lubricant cleaner. Refer to Table 2-3.

2-69