AIR CONDITIONER BINARY SWITCH REPLACEMENT -699581181

TM 9-2320-363-20-2

AIR CONDITIONER BINARY SWITCH REPLACEMENT

This task covers:

a Removal

b. Installation

INITIAL SETUP

Applicable Configuration:

General Safety Instructions:

All except M915A2 and M916A1

WARNING

Use care to prevent refrigerant from

Tools and Special Equipment:

touching your skin or eyes, because

Tool Kit, SC 5180-90-CL-N26

liquid refrigerant, when exposed to air,

quickly evaporates and will freeze skin or

Materials/Parts:

eye tissue. Serious injury or blindness

could result if you come in contact with

Packing, Preformed

P/N 2-011C944-70

liquid refrigerant.

Loctite

Appendix B, Item 33

Refrigerant R-134a air conditioning

Oil, Refrigerant

Appendix B, Item 67

system should not be pressure tested or

Equipment Condition:

leak tested with compressed air.

Combustible mixtures of air and R-134a

Reference

Condition Description

may form, resulting in a fire or explosion,

which could cause personal injury

Page 2-29

Batteries Disconnected

References:

TM 9-2320-363-10

REMOVAL

DISCONNECT HARNESS CONNECTOR (1) FROM BINARY SWITCH (2)

REMOVE THE BINARY SWITCH (2) FROM RECEIVER-DRIER (3).

INSTALLATION

LUBRICATE NEW O-RING WITH REFRIGERANT

OIL, THEN INSTALL OVER MALE THREADS OF

RECEIVER-DRIER COUPLING.

INSTALL BINARY SWITCH (2) AND TIGHTEN

TO 20 TO 25 LB-FT (27 TO 34 N.m).

CONNECT HARNESS CONNECTOR (1).

NOTE

Follow-on Maintenance:

Connect batteries (page 2-29).

Operate air conditioner system (TM 9-2320-363-10).

Change 3 4-877