WINCH HYDRAULIC OIL FILTER ELEMENT REPLACEMENT

TM 9-2320-363-20-2

WINCH HYDRAULIC OIL FILTER ELEMENT REPLACEMENT

This task covers:

a. Removal

b. Cleaning/Inspection

c. Installation

INITIAL SETUP

Applicable Configuration:

References:

M916A1 and M916A2

TM 9-2320-363-20-1

Tools and Special Equipment:

General Safety Instructions:

Shop Equipment, SC 4910-95-CL-A72

Tool Kit, SC 5180-90-CL-N26

WARNING

Materials/Parts:

Spilled hydraulic fluid is very

slippery. Wipe up any spilled

Element, Oil

P/N 74011

fluid immediately. Failure to do

Filter with Gasket

so could result in serious injury

to personnel.

Oil, Lubricating

REMOVAL

WARNING

Spilled hydraulic fluid is very slippery. Wipe up any spilled fluid immediately.

Failure to do so could result in serious injury to personnel.

NOTE

Place suitable container under oil filter to catch oil that will drain out when filter is

removed.

REMOVE AND DISCARD OIL FILTER ELEMENT (1) AND GASKET (2) FROM OIL FILTER (3).

CLEANING/INSPECTION

Clean and inspect all parts in accordance with Chapter 2.

4-766 Change 3