HOOD TILT ASSIST REPLACEMENT AND REPAIR

TM 9-2320-363-20-2

HOOD TILT ASSIST REPLACEMENT AND REPAIR

This task covers:

a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation

INITIAL

SETUP

Tools and Special Equipment:

Tool Kit, SC 5180-90-CL-N26

Materials/Parts:

Nut, Lock (3)

Nut, Lock (2)

NOTE

M a k e sure support is padded and is as long and wide as front of hood.

RAISE HOOD AND PLACE SUITABLE SUPPORT BETWEEN HOOD AND GROUND.

REMOVE TWO CHAIN LINKS (1) FROM BETWEEN TWO RADIATOR BRACKETS (2) AND TILT

ASSIST ASSEMBLY (3).

R E M O V E FOUR SCREWS (4), FOUR WASHERS (5), AND TILT ASSIST ASSEMBLY (3) FROM

HOOD.

DISASSEMBLY

REMOVE LOCK NUT (6), SCREW (7), BRACKET (8), AND SPACER (9) FROM SPRING (10).

DISCARD LOCK NUT.

REMOVE LOCK NUT (11), SCREW (12), AND TILT STOP CABLE (13) FROM BRACKET (8).

DISCARD LOCK NUT.

REMOVE LOCK NUT (14), SCREW (15), TILT STOP CABLE (13), TWO LOCK NUTS (16), TWO

SCREWS (17), AND TWO CABLES (18) FROM YOKE (19). DISCARD LOCK NUTS.

CLEANING/INSPECTION

Clean and inspect all parts in accordance with Chapter 2.