HOOD ADJUSTMENT -699580925

9-2320-363-20-2

HOOD ADJUSTMENT

This task covers:

Adjustment

INITIAL SETUP

Personnel Required: (2)

Tools and Special Equipment:

Shop Equipment, SC 4910-95-CL-A72

References:

TOOI Kit, SC 5180-90-CL-N26

TM 9-2320-363-10

Materials/Parts:

Equipment Condition:

Nut, Lock (5)

Condition Description

Reference

Shim

P/N 17-10320-001

TM 9-2320-363-10

Vehicle Parked on Flat

Level Surface

ADJUSTMENT

NOTE

Steps 1 thru 4 are to determine if hood adjustment is necessary.

MEASURE AND NOTE GAP BETWEEN REAR EDGE OF HOOD (1) AND COWL (2) AT SEAM AND

8 IN. (203 mm) BELOW SEAM. GAP SHOULD BE 1/2-3/4 IN. (13-19 mm).

CHECK THAT FRONT OF HOOD (1) IS CENTERED WITH BUMPER (3). CHECK THAT SPACE

BETWEEN TOP EDGE OF BUMPER (3) AND LOWER EDGE OF HOOD (1) IS EQUAL AT BOTH ENDS.

MAKE SURE HOOD (1) IS NOT TOUCHING ANY COMPONENTS ATTACHED TO FRAME.

IF ANY COMPONENTS ARE FOUND TO BE TOUCHING HOOD (1), IDENTIFY AND CORRECT

PROBLEM AND REPEAT STEPS 1 AND 2.

TILT HOOD (1) TO FULLY OPEN POSITION.