 |
|||
|
|
|||
|
Page Title:
REAR TIE DOWN AND ROLLER REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-363-20-2
REAR TIE DOWN AND ROLLER REPLACEMENT
This task covers:
a. Removal
b. Cleaning/inspection
c. Installation
INITIAL SETUP
Applicable Configuration:
Equipment Condition:
M916A1 and M916A2
Reference
Condition Description
Tools and Special Equipment:
Mud Flap Assembly
Removed
Shop Equipment, SC 4910-95-CL-A72
Tool Kit, SC 5180-90-CL-N26
General Safety Instructions:
Materials/Parts:
Nut, Lock
P/N 23-09901-107
WARNING
Roller weighs 200 lb (91 kg).
Nut, Lock (4)
Attach suitable hoist prior to
removal or installation to
Nut, Lock (12)
P/N 23-00901-116
prevent possible injury to
personnel.
Personnel Required: (2)
References:
TM 9-2320-363-20-1
REMOVAL
1.
REMOVE TWO LOCK NUTS (1), TWO WASHERS (2), TWO SCREWS (3), TWO WASHERS (4), AND LEFT MUD
FLAP BRACKET (5). DISCARD LOCK NUTS.
2.
REMOVE LOCK NUT (6) AND SCREW (7). DISCARD LOCK NUT.
WARNING
Roller weighs 200 lb (91 kg).
Attach suitable hoist prior to removal to prevent
possible injury to personnel.
3.
USING SUITABLE HOIST, SUPPORT TAIL ROLLER (8).
4.
REMOVE SIX LOCK NUTS (9), SIX WASHERS (10), SIX BOLTS (11), SIX WASHERS (12), AND LEFT TIE DOWN
BRACKET (13). DISCARD LOCK NUTS.
5.
REMOVE TAIL ROLLER (8).
6.
REMOVE TWO LUBRICATION FITTINGS (14) FROM TAIL ROLLER (8).
7.
REPEAT STEPS 1 AND 4 FOR RIGHT MUD FLAP BRACKET (15) AND RIGHT TIE DOWN BRACKET (16).
4-636 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals