CTIS QUICK RELEASE VALVE MAINTENANCE

TM 9-2320-363-20-2

CTIS QUICK RELEASE VALVE MAINTENANCE

This task covers:

a. Removal

b. Disassembly

c. Cleaning/Inspec tion

d. Assembly

e. Installation

INITIAL SETUP I

Applicable Configuration:

Equipment Condition:

M917A1 and M917A1 w/MCS

Reference

Condition Description

Tools and Special Equipment:

TM 9-2320-363-10

Vehicle Air System

Drained

Tool Kit, SC 5180-90-CL-N26

General Safety Instructions:

Materials/Parts:

Kit, Repair

P/N 599819

WARNING

Always wear eye protection.

References:

TM 9-2320-363-10

REMOVAL

WARNING

Always wear eye protection when disconnecting CTIS air lines. Residual air in air

lines will be expelled even though vehicle air system is drained. Failure to follow

this warning could result in eye injury.

NOTE

Replacement of CTIS quick release valve at front or rear is similar. Replacement of

rearmost quick release valve is illustrated.

DISCONNECT TWO HOSES (1) AND REMOVE TEE (2) AND ADAPTER (3) FROM AIR INLET PORT ON QUICK

RELEASE VALVE (4).

DISCONNECT TWO HOSES (5) AND REMOVE TWO ADAPTERS (6) FROM TWO AIR OUTLET PORTS ON

QUICK RELEASE VALVE (4).

REMOVE TWO BOL TS (7), TWO NUTS (8), FOUR FLAT WASHERS (9), AND QUICK RELEASE VALVE (4).

4-604.26 Change 3