 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
2.
REMOVE 10 SCREWS (2) AND 10 LOCK WASHERS (3) FROM HUB CAP (4). DISCARD LOCK WASHERS.
3.
REMOVE TWO SCREWS (5) FROM HUB CAP (4).
NOTE
To perform step 4, use two 1/2 x 13 x 3-1/2 in. capscrews.
4.
INSTALL TWO SCREWS (6) IN HUB CAP (4) IN SAME LOCATION AS TWO SCREWS (5) REMOVED IN STEP 3.
5.
ALTERNATELY TIGHTEN TWO SCREWS (6) UNTIL HUB CAP (4) CAN BE REMOVED.
6.
REMOVE TWO SCREWS (6) FROM HUB CAP (4).
NOTE
To perform step 7, it may be necessary to rotate hub and drum assembly.
7.
REMOVE SCREW (7), LOCK WASHER (8), AND LOCK (9). DISCARD LOCK WASHER.
8.
USING BEARING NUT WRENCH, REMOVE LOCK NUT (10).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals