FRONT AND DUAL REAR WHEEL LUG NUT TIGHTENING PROCEDURES -699580805

TM 9-2320-363-20-2

FRONT AND DUAL REAR WHEEL LUG NUT TIGHTENING PROCEDURES

This task covers:

a Front Wheel Lug Nut Tightening Procedure

b. Dual Rear Wheel Lug Nut Tightening Procedure

INITIAL SETUP

Tools and Special Equipment:

General Safety Instructions:

Shop Equipment, SC 4910-95-CL-A72

WARNING

Wheel Socket, PIN 6991

Whenever any inner and/or outer wheel

lug nuts require tightening or a wheel

has been removed and replaced, all inner

and outer lug nuts must be retorqued to

the required torque. Failure to follow this

warning may result in serious injury to

personnel or damage to equipment.

FRONT WHEEL LUG NUT TIGHTENING PROCEDURE

WARNING

Whenever any Inner and/or outer wheel lug nuts require tightening or a wheel has

been removed and replaced, all inner and outer lug nuts must be retorqued to the

required torque. Failure to follow this warning may result in serious injury to

personnel or damage to equipment

NOTE

Tightening pattern is the same for all wheel assemblies. Wheel nuts on left side

of vehicle are left hand threads (turn right to loosen, turn left to tighten). Wheel

nuts on right side of vehicle are right hand threads (turn left to loosen, turn

right to tighten).

After operating vehicle for 50 to 100 miles (80 to 160 km), retorque wheel nuts.

Change 3 4-583