 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
REAR ANTI-LOCK BRAKE SYSTEM (ABS) AIR SOLENOID REPLACEMENT (CONT)
REMOVAL
WARNING
Make sure all air lines and fittings are clear of debris. Make sure excess pipe
sealant compound does not enter air lines or fittings. Failure to do so could result
in equipment failure and/or injury to personnel.
NOTE
Procedure is the same for both sides of vehicle. Right side is shown.
1.
DISCONNECT ELECTRICAL CONNECTOR (1) FROM AIR SOLENOID (2).
2.
DISCONNECT THREE AIR LINES (3, 4, AND 5) FROM AIR SOLENOID (2).
3.
REMOVE TWO LOCK NUTS (6), TWO WASHERS (7), AIR SOLENOID (2), TWO SPACERS (8), TWO
CAPSCREWS (9), AND TWO WASHERS (10). DISCARD LOCK NUTS.
4.
REMOVE TWO ELBOWS (11) AND FITTING (12) FROM AIR SOLENOID (2).
5.
REMOVE FITTING (13) FROM AIR SOLENOID (2).
CLEANING/INSPECTION
Clean and inspect all parts in accordance with Chapter 2.
INSTALLATION
WARNING
Make sure all air lines and fittings are clear of debris. Make sure excess pipe
sealant compound does not enter air lines or fittings. Failure to do so could result
in equipment failure and/or injury to personnel.
NOTE
Procedure is the same for both sides of vehicle. Right side is shown.
1.
COAT THREADS OF FITTING (13) WITH PIPE SEALANT AND INSTALL FITTING (13) IN AIR SOLENOID (2).
2.
COAT THREADS OF TWO ELBOWS (11) AND FITTING (12) WITH PIPE SEALANT AND INSTALL TWO ELBOWS
(11) AND FITTING (12) IN AIR SOLENOID (2).
4-580
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals