REAR TRACTOR PROTECTION VALVE REPLACEMENT

TM 9-2320-363-20-2

REAR TRACTOR PROTECTION VALVE REPLACEMENT

This task covers:

a. Removal b. Cleaning/Inspection c. Installation

INITIAL SETUP

General Safety instructions:

Tools and Special Equipment:

Tool Kit, SC 5180-90-CL-N26

WARNING

Materials/Parts:

Make sure all air lines and

fittings are clear of debris.

Nut, Lock (2)

P/N 23-10340-125

Make sure excess pipe

Compound, Pipe

sealant compound does not

Sealing

enter air lines or fittings.

F a i l u r e to do so could result

Equipment Condition:

in equipment failure and/or

i n j u r y to personnel.

Reference

Condition Description

Sealant compounds can burn

Air System Drained

Page 2-28

easily, can give off harmful

vapors, and are harmful to

skin and clothing. To avoid

injury or death, keep away

from open fire and use in

w e l l - v e n t i l a t e d area. If sealant

compound gets on skin or

clothing, wash immediately

w i t h soap and water.

REMOVAL

NOTE

T a g all tubes prior to disconnecting to aid in installation.

DISCONNECT FOUR TUBES (1) AND REMOVE FOUR CONNECTORS (2) FROM TRACTOR

PROTECTION VALVE (3).

REMOVE TWO LOCK NUTS (4), TWO WASHERS (5), TWO SCREWS (6), TWO WASHERS (7), AND

TRACTOR PROTECTION VALVE (3). DISCARD LOCK NUTS.

C L E A N I N G/I N S P E C T I O N

Clean and inspect all parts in accordance with Chapter 2.