CONSTANT AIR JUNCTION BLOCK REPLACEMENT -699580727

TM 9-2320-363-20-2

CONSTANT AIR JUNCTION BLOCK REPLACEMENT

This task covers:

a. Removal

b. Cleaning/Inspection

c. Installation

INITIAL SETUP

Tools and Special Equipment:

General Safety Instructions:

Shop Equipment, SC 4910-95-CL-A72

Tool Kit, SC 5180-90-CL-N26

WARNING

Make sure all air lines and

Materials/Parts:

fitting s are clear of debris.

Nut, Kep (2)

P/N 420Z

Make sure excess pipe

sealant compound does not

Compound, Pipe

enter air lines or fittings.

Failure to do so could result

Equipment Condition:

in equipment failure and/or

injury to personnel.

Reference

Condition Description

Sealant compounds can burn

Page 2-28

Air System Drained

easily, can give off harmful

vapors, and are harmful to

skin and clothing. To avoid

injury or death, keep away

from open fire and use in

well-ventilated area. If sealant

compound gets on skin or

clothing, wash immediately

with soap and water.

REMOVAL

NOTE

Procedure is the same for all vehicles except as noted.

REMOVE SIX TORX SCREWS (1), DASH TOP COVER (2), AND FIVE TORX SCREWS (3). SET TACHOGRAPH

PANEL (4) ASIDE.

Change 3 4-517