SECONDARY AIR TANK AND FITTINGS REPLACEMENT -699580672

TM9-2320-363-20-2

S E C O N D A R Y AIR TANK AND FITTINGS REPLACEMENT

This task covers:

a. Removal b. Cleaning/Inspection c. Installation

INITIAL SETUP

General Safety Instructions:

Applicable Configuration:

M915A2

WARNING

Tools and Special Equipment:

Make sure all air lines and

fittings are clear of debris.

Tool Kit, SC 5180-90-CL-N26

Make sure excess pipe

Materials/Parts:

sealant compound does not

enter air lines or fittings.

Nut, Lock (10)

F a i l u r e to do so could result

in equipment failure and/or

Appendix C, Item 8

Compound, Pipe

i n j u r y to personnel.

Sealing

S e a l a n t compounds can burn

Equipment Condition:

easily, can give off harmful

Reference

Condition Description

vapors, and are harmful to

skin and clothing. To avoid

Page 2-28

Air System Drained

injury or death, keep away

from open fire and use in

w e l l - v e n t i l a t e d area. If sealant

compound gets on skin or

clothing, wash immediately

w i t h soap and water.

REMOVAL

NOTE

T a g all tubes prior to disconnecting to aid in connecting.

DISCONNECT FOUR TUBES (1) AND HOSE (2) FROM AIR TANK (3).

REMOVE TWO LOCK NUTS (4), TWO SCREWS (5), AND AIR TANK (3). DISCARD LOCK NUTS.

REMOVE TWO LOCK NUTS (6), TWO WASHERS (7), TWO CAPSCREWS (8), AND TWO WASHERS

(9) AND SET CABLE (10) ASIDE. DISCARD LOCK NUTS.

REMOVE TWO LOCK NUTS (11), TWO WASHERS (12), AND TWO BRACKETS (13). DISCARD

LOCK NUTS.

REMOVE TWO LOCK NUTS (14), TWO WASHERS (15), TWO CLAMPS (16), AND TWO MOUNTING

BRACKETS (17). DISCARD LOCK NUTS.

REMOVE TWO LOCK NUTS (18), TWO WASHERS (19), TWO CAPSCREWS (20), TWO WASHERS

(21), AND TWO BRACKETS (22). DISCARD LOCK NUTS.

4-470