INSTALLATION (Cont) -699580644

TM9-2320-363-20-2

S L A C K ADJUSTER AND S-CAM REPLACEMENT (CONT)

14.

MAKE SURE S-CAM (1) IS AGAINST BRAKE SPIDER (16).

15.

ATTACH MAGNETIC BASE OF DIAL INDICATOR TO BRAKE SPIDER (16) AND RESET DIAL

INDICATOR TO ZERO.

NOTE

If reading is more than 0.06 in. (1.5 mm), perform steps 3 thru 5 of Removal and

s t e p s 1 thru 16 of Installation.

16.

PUSH S-CAM (1) OUTWARD TO END OF ITS TRAVEL AND CHECK READING ON DIAL

INDICATOR.

17.

INSTALL NEW LARGE COTTER PIN (17) IN LARGE CLEWS PIN (13).

18.

INSTALL NEW SMALL COTTER PIN (18) IN SMALL CLEW PIN (15).

NOTE

Follow-on Maintenance:

I n s t a l l front brakeshoe and lining (page 4-407).

I n s t a l l rear brakeshoe and lining (page 4-413).

4-440