 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
1.
REMOVE TWO NUTS (1), TWO LOCK WASHERS (2), AND TWO CAPSCREWS (3). DISCARD LOCK
WASHERS.
2.
REMOVE TWO NUTS (4) AND TWO LOCK WASHERS (5) FROM BRAKE SPIDER (6). DISCARD
LOCK WASHERS.
3.
REMOVE TWO CAPSCREWS (7) AND 2-PIECE DUST SHIELD (8) FROM BRAKE SPIDER (6).
4.
REMOVE TWO NUTS (9), TWO CAPSCREWS (10), AND TWO CLAMPS (11) FROM BRAKE SPIDER
(6).
NOTE
N o t e position of brake chamber bracket prior to removal to aid in installation.
REMOVE TWO NUTS (12), TWO LOCK WASHERS (13), TWO CAPSCREWS (14), AND BRAKE
5.
CHAMBER BRACKET (15) FROM BRAKE SPIDER (6). DISCARD LOCK WASHERS.
REMOVE TWO SEALS (16) AND TWO BUSHINGS (17) FROM BRAKE CHAMBER BRACKET (15).
6.
DISCARD SEALS.
7.
REMOVE SEVEN LOCK NUTS (18), SEVEN WASHERS (19), SEVEN CAPSCREWS (20), AND
BRAKE SPIDER (6) FROM AXLE FLANGE (21). DISCARD LOCK NUTS.
Clean and inspect all parts in accordance with Chapter 2.
1.
INSTALL BRAKE SPIDER (1) ON AXLE FLANGE (2).
2.
INSTALL SEVEN CAPSCREWS (3), SEVEN WASHERS (4), AND SEVEN NEW LOCK NUTS (5) IN
BRAKE SPIDER (l). TIGHTEN LOCK NUTS TO 75 LB-FT (102 NZm) IN SEQUENCE SHOWN.
TIGHTEN LOCK NUTS AGAIN TO 150-175 LB-~ (203-237 Nm) IN SEQUENCE SHOWN.
4-429
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals