 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
NOTE
Step 6 is for all except M915A2 only.
6.
CONNECT BRAKE CHAMBER CLEVIS (9) TO SLACK ADJUSTER (10) WITH CLEVIS PIN (11) AND NEW
COTTER PIN (12).
NOTE
Step 7 is for M915A2 only.
7.
CONNECT BRAKE CHAMBER CLEVIS (9) TO SLACK ADJUSTER (10) WITH TWO CLEVIS PINS (11) AND TWO
NEW COTTER PINS (12).
8.
CONNECT SERVICE BRAKE HOSE (6) AND SPRING BRAKE HOSE (7) TO TWO FITTINGS (1 AND 3).
UNCAGING POWER SPRING
NOTE
Refer to TM 9-2320-363-10 for engine start and stop procedures.
1.
START ENGINE AND RUN UNTIL CAB AIR PRESSURE GAGE INDICATES SUFFICIENT AIR PRESSURE (105-
120 PSI) TO RELEASE PARKING BRAKE.
2.
PUSH IN PARKING BRAKE CONTROL IN CAB TO APPLY PRESSURE AT BRAKE COMPRESSION SPRING.
TURN ENGINE OFF.
3.
BACK OFF NUT (1) FROM CAGING STUD (2) UNTIL CAGING STUD (2) CAN BE ROTATED 1/4 TURN
COUNTERCLOCKWISE.
4.
REMOVE CAGING STUD (2), NUT (1), AND WASHER (3) FROM BRAKE CHAMBER (4).
5.
PRESS DUST COVER (5) INTO ACCESS HOLE IN BRAKE CHAMBER (4).
6.
INSTALL CAGING STUD (2), WASHER (3), AND NUT (1) IN BRAKE CHAMBER (4).
Change 3 4-427
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals