INSTALLATION -699580630

TM 9-2320-363-20-2

REAR BRAKE CHAMBERS REPLACEMENT (CONT)

CLEANING/INSPECTION

Clean and inspect all parts in accordance with Chapter 2.

INSTALLATION

WARNING

Sealant compounds can burn easily, can give off harmful vapors, and are harmful

to skin and clothing. To avoid injury or death, keep away from open fire and use in

well-ventilated area.

If sealant compound gets on skin or clothing, wash

immediately with soap and water.

COAT SERVICE BRAKE FITTING (1) WITH PIPE SEALANT COMPOUND AND INSTALL IN BRAKE CHAMBER

(2).

COAT SPRING BRAKE FITTING (3) WITH PIPE SEALANT COMPOUND AND INSTALL IN BRAKE CHAMBER

(2).

NOTE

M915A2 brake chamber is mounted in upper part of figure 8 hole.

All except

M915A2 brake chamber is mounted in lower part of figure 8 hole.

INSTALL BRAKE CHAMBER (2) SO THAT TWO FITTINGS (1 AND 3) ARE ACCESSIBLE.

INSTALL TWO FLAT WASHERS (4) AND TWO NEW LOCK NUTS (5).

IF TWO FITTINGS (1 AND 3) ARE NOT PROPERLY ALINED WITH TWO HOSES (6 AND 7), LOOSEN NUT (8)

AND ROTATE BRAKE CHAMBER (2) UNTIL TWO FITTINGS (1 AND 3) AND TWO HOSES (6 AND 7) ARE

ALINED.

4-426 Change 3