 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
SHIFT TOWER REPLACEMENT (CONT)
11.
PLACE TRANSFER CASE SELECTOR LEVER IN "N" POSITION.
12.
TAG TRANSFER CASE SHIFT CABLE (19).
13.
REMOVE TWO NUTS (20), TWO LOCK WASHERS (21), TWO SCREWS (22), CLAMP (23), AND SPACER (24)
FROM BRACKET (25). DISCARD LOCK WASHERS.
14.
REMOVE RETAINING PIN (26) FROM PIVOT PIN (27) AND PIVOT PIN FROM BRACKET (28)
NOTE
Perform steps 15 through 18 for M917A1 and M917A1 w/MCS.
15.
PLACE HYDRAULIC CONTROL LEVER IN "DOWN" POSITION.
16.
TAG HYDRAULIC CONTROL CABLE (29).
17.
REMOVE TWO NUTS (30), TWO LOCK WASHERS (31), TWO SCREWS (32), CLAMP (33), AND SPACER (34)
FROM BRACKET (35). DISCARD LOCK WASHERS.
18.
REMOVE RETAINING PIN (36) FROM PIVOT PIN (37) AND PIVOT PIN FROM BRACKET (38).
4-366.6 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals